© Mark Biegert and Math Encounters, 2021. Publication of this material without express and written permission from this blog’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Mark Biegert and Math Encounters with appropriate and specific direction to the original content.
DisclaimerAll content provided on the mathscinotes.com blog is for informational purposes only. The owner of this blog makes no representations as to the accuracy or completeness of any information on this site or found by following any link on this site. The owner of mathscinotes.com will not be liable for any errors or omissions in this information nor for the availability of this information. The owner will not be liable for any losses, injuries, or damages from the display or use of this information.
Daily Archives: 3-June-2015
I previously wrote a blog post about how to select components for a Schmitt trigger circuit using a comparator with an open-collector output. An engineer stopped by my cube yesterday and asked if I could write-up the same analysis for a Schmitt trigger circuit using a comparator with a push-pull output. This post will provide that analysis. The only thing unusual about the circuit is the use of a Zener diode as a voltage reference instead of the more commonly seen resistor divider network. Continue reading