© Mark Biegert and Math Encounters, 2022. Publication of this material without express and written permission from this blog’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Mark Biegert and Math Encounters with appropriate and specific direction to the original content.
DisclaimerAll content provided on the mathscinotes.com blog is for informational purposes only. The owner of this blog makes no representations as to the accuracy or completeness of any information on this site or found by following any link on this site. The owner of mathscinotes.com will not be liable for any errors or omissions in this information nor for the availability of this information. The owner will not be liable for any losses, injuries, or damages from the display or use of this information.
Daily Archives: 19-June-2018
Switch-Controlled Circuit To Isolate Battery from Load
I recently was asked if it was possible to design a circuit that will isolate a battery from a circuit until a momentary switch is closed (Figure 1). Once the momentary switch is closed, the battery is connected to the rest of the circuit and it cannot be disconnected by further mechanical switch closures. This was just a proof-of-feasibility exercise and NOT a final implementation. However, it was a good example of how to use LTSpice to verify the first design concept and is worthwhile documenting here. Continue reading
Posted in Electronics Comments Off on Switch-Controlled Circuit To Isolate Battery from Load