© Mark Biegert and Math Encounters, 2022. Publication of this material without express and written permission from this blog’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Mark Biegert and Math Encounters with appropriate and specific direction to the original content.
DisclaimerAll content provided on the mathscinotes.com blog is for informational purposes only. The owner of this blog makes no representations as to the accuracy or completeness of any information on this site or found by following any link on this site. The owner of mathscinotes.com will not be liable for any errors or omissions in this information nor for the availability of this information. The owner will not be liable for any losses, injuries, or damages from the display or use of this information.
Daily Archives: 17-February-2019
I test high-speed serial channels every day. The most common test parameter that I need to measure is the Bit Error Rate (BER). Figure 1 shows the most common test configuration used for measuring BER. Because bit errors occur randomly, there is a certain amount of error involved in measuring the parameter. So when you state a BER measurement, you also give a confidence interval to express your level of uncertainty. Continue reading