Subscribe to Blog via Email
© Mark Biegert and Math Encounters, 2020. Publication of this material without express and written permission from this blog’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Mark Biegert and Math Encounters with appropriate and specific direction to the original content.
DisclaimerAll content provided on the mathscinotes.com blog is for informational purposes only. The owner of this blog makes no representations as to the accuracy or completeness of any information on this site or found by following any link on this site. The owner of mathscinotes.com will not be liable for any errors or omissions in this information nor for the availability of this information. The owner will not be liable for any losses, injuries, or damages from the display or use of this information.
Daily Archives: 27-April-2019
I was asked last week to write a vibration test plan for a mobile electronic product. I am used to writing vibration test plans that follow canned procedures in standards like MIL-STD-810F or SAE J1455, but this case is different because the customer has specified a non‑standard random vibration acceleration profile, which is also called a Power Spectral Density (PSD). I need to determine the RMS g level for this profile. This post shows how I go about this calculation. I am not going to showing the customer's vibration PSD because it is proprietary. Instead, I will use a well‑known US Navy vibration PSD as a computation example (Figure 1). Continue reading