© Mark Biegert and Math Encounters, 2022. Publication of this material without express and written permission from this blog’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Mark Biegert and Math Encounters with appropriate and specific direction to the original content.
DisclaimerAll content provided on the mathscinotes.com blog is for informational purposes only. The owner of this blog makes no representations as to the accuracy or completeness of any information on this site or found by following any link on this site. The owner of mathscinotes.com will not be liable for any errors or omissions in this information nor for the availability of this information. The owner will not be liable for any losses, injuries, or damages from the display or use of this information.
Daily Archives: 9-June-2016
Instrumentation Amplifier Gain Adjustment
I have an existing circuit for which I need to modify the front-end gain. The gain is provided by an LT1101, which is a common instrumentation amplifier. This part is normally used with one of its two fixed gain settings (10x, 100x). As commonly happens, I need to find a way to resolve an issue without making major changes to a circuit. The designers of the LT1101 provided you a way to modify the amplifiers gain by adding two resistors to the circuit. Figure 1 shows the modified circuit, with the added resistors marked with red ovals and labeled Rx. Continue reading
Posted in Electronics Comments Off on Instrumentation Amplifier Gain Adjustment