Subscribe to Blog via Email
© Mark Biegert and Math Encounters, 2020. Publication of this material without express and written permission from this blog’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Mark Biegert and Math Encounters with appropriate and specific direction to the original content.
DisclaimerAll content provided on the mathscinotes.com blog is for informational purposes only. The owner of this blog makes no representations as to the accuracy or completeness of any information on this site or found by following any link on this site. The owner of mathscinotes.com will not be liable for any errors or omissions in this information nor for the availability of this information. The owner will not be liable for any losses, injuries, or damages from the display or use of this information.
Daily Archives: 21-June-2016
I was asked this morning about how to create a 3D plot in Mathcad that shows a surface, two lines on the surface, and marks the point of intersection of the two lines (Figure 1). It just so happens that I have been looking at the amount of current that a PCB trace of a given area can carry for a given temperature rise above ambient. While the curve itself is a bit boring and viewing it in 3D does not add any value, this example does illustrate the procedure for generating this type of plot. Continue reading